Products

DESCRIPTION

Basic Info

Model NO.	TL12S
Short Circuit Protection	Yes
Over Current Protection	Yes
Warranty	3 Years
Rated Votage	3.2V
Transport Package	Standard Express Packing
Specification	20A: 50*63*12mm
Trademark	Deligreen
Origin	China
Production Capacity	20000 Piece/Month

Product Description

36V LiFePO4 BMS 12S 15A-60A 18650 Battery BMS Packs PCB Protection Board Balance Integrated Circuits
1. We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.2. The main functions are: over charge protection, over discharge protection, overcurrent protection, short-circuit protection, temperature protection etc.3. According to the customer request we can develop PCM in different sizes and structures.4. BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle service life time.
Product Parameters

	Content	Spec						Unit
		15A	20A	30A	40A	50A	60A
Discharge	constant discharge current	15	20	30	40	50	60	A
	peak discharge current	40	50	80	100	130	150	A
	Over current protection	40	50	80	100	130	150	A
charge	charge voltage	Series No. * 3.65						V
	charge current	Within discharge current						A
Over charge protection	over charge volt	3.65±0.025						V
	over charge volt protect delay	0.5						S
	Over charge volt release	3.6±0.05						V
Power balancing	Power balance volt	3.6						V
	balance release volt	3.6						V
	balance current	35±5						mA
Over discharge protection	Over discharge detect volt	2.5±0.05						V
	Over discharge detect delay	0.5						S
	Over discharge volt release	3.0±0.05						V
Over current protection	Over current detect volt	200						mV
	Over current detect delay	9						MS
	Over current protect release	Disconnect load
Short circuit protection	Short circuit protection	External load short circuit
	Short circuit detect delay	250						uS
	Short circuit detect release	Disconnect load
Temperature protection	Temp protection	none						Can be customized
resistance	Main circuit resistor	≤10						mΩ
Self-consumption	Working current	≤40						uA
	Sleepy current(when battery is over discharged )	≤20						uA
Working temp	temp range	-30~80						ºC

Product Details Show How To Select BMSWhy Choose Us
AdvantagesVarious Available Battery TypeProfessional Technical SupportWide ApplicationCertifications Our Factory

FAQ
1. Which current of the PCB should i choose?Take 13S 48V pack as an example: Which PCB you should choose depends on the power of your motor or the current limitation of your controller. Below 350W ,you can choose 16A.Below 500W, you can choose 18A, Below 800W, you can choose 35A,Below 1KW, you can choose 60A. Above 1200W, the same. If you are not sure, please contact us freely.2. Can i use bigger size of PCB than it should?Suppose you need 60A PCB but you chose 80A, that is OK. 80A allows higher current.Nothing bad but a bit higher price.But if you choose 50A, sorry it is too small. So you can choose higher spec but can't choose lower one than it should have been.3. What kind of charger should i choose?Lithium battery must be charged by lithium battery charger. You can't charge it with a lead acid battery charger. The lead acid battery charger might damage MOS pipe of the PCB.4. if i have PCB, do i need any balancers?Yes if you can add QNBBM balancers, that would be perfect. The Main function of PCB is to prevent batteries from over charged or over discharged,over heated etc.All the PCB /BMS in the world balance performance is not satisfactory. With balancers added, the batteries lifespan will be longer and the capacity will be fully used.5, How to judge if my PCB is broken or not ?If you'd like to judge if the PCB is fine or not, please use a multi-meter and see if the voltageof each cell is close to each other or not.when the volt difference is 1V, the battery will have such performance:driving distance is short, cut off when started, charging time is very short.under such situation , some battery is defective. When the PCB is broken, the battery can't be discharged when you measured the battery volt is normal.